电工圆铜杆(8mm)产品认证
电工圆铜杆(8mm)性能优势
-
表面光亮无毛刺
-
性能质量优越
-
可满足您对拉制细线、微细线、特种产品的技术要求
电工圆铜杆(8mm)应用领域
海底电缆
光伏电缆线
电工圆铜杆(8mm)性能参数资料下载
产品性能
Product properties
|
内控标准
Internal Control Standards
|
±10转turns |
铜刺Copper spikes |
无None |
– |
裂缝Crack |
合计3cm以下
Total less than 3cm
|
– |
剥离Peel off |
合计3cm以下
Total less than 3cm
|
– |
铜粉(mg)Copper powder |
|
≤5mg |
≤15mg |
±10转至扭断(转数)
Turns until torsion(turns)
|
|
≥30没有不良喇叭口状或裂缝
Without any bell-shapes or cracks
|
≥25 |
含氧量(ppm)Oxygen content |
|
200-250 |
≤400 |
探伤数
Number of flaws detected
|
大(L) |
≤1 |
– |
中(M) |
≤3 |
– |
小(S) |
≤30 |
– |
探铁数
Number of iron detected
|
大(L) |
0 |
– |
中(M) |
0 |
– |
小(S) |
0 |
– |
伸长率(%)Elongation |
≥40 |
≥40 |
线径Diameter |
8.0±0.2mm |
8.0±0.4mm |
电阻Resistance |
≤0.01704 |
≤0.01707 |
氧化层(埃)Oxide layers |
﹤600 |
– |
外观Appearance |
表面光滑,无飞边、夹杂等缺陷
Smooth surface, no burr, no impurities or other flaws
|
表面光滑,无飞边、夹杂等缺陷
Smooth surface, no burr, no impurities or other flaws
|
生产状况
Production condition
|
卡炉Blocks in the furnace |
无none |
– |
冷铜Cold copper |
无none |
– |
汤温稳定性
Stabilitu of copper water temperature
|
±5℃ |
– |
铸锭温度稳定性
Stability of ingot temperature
|
±5℃ |
– |
浇注状况Casting condition |
液位无大幅度波动
Without significant fluctuations in the level
|
– |
其他Others |
正常、稳定Normal and Stable |
– |
电工圆铜杆(8mm)生产工艺流程

Φ8mm铜杆生产工艺如下:
原物料 → 熔炼 → 浇铸 → 削边 → 轧制 → 无酸清洗 → 水蜡喷涂 → 收线 → 成品检验 → 压实 → 包装 → 入库
电工圆铜杆(8mm)执行标准
GB/T3953-2009、GB/T4910-2009、GB/T12970-2009、GB/T3952-2016
电工圆铜杆(8mm)生产设备
美国连铸连轧生产线
绞线机
德国尼霍夫拉丝生产线-
单丝设备
大拉机
|